Contact form
Project
Carbide rip on pine for a Somerset carcass run.
This Somerset West carcass run used pine boards ripped for cabinet sides, tops and fixed shelving. A Carbide Rip Blade carried the long cuts, with the material logged under Pine rip path so the kerf and feed behaviour stayed tied to one record. On softwood like this, straight grain still needed checking for resin pockets and slight bow before the first full batch went through.
First-board photos were kept with the job notes after the initial pine lengths came off the saw. We also recorded flange condition, arbor cleanliness and any pitch build-up that could shift the cut on a longer run. For matching work, send the stock details and town through our contact form so the blade and timber notes can be compared properly.
The setup record from the carcass pieces matters as much as the image of the first board. Kerf width, cut direction, board condition and saw condition were written against Carbide Rip Blade and Pine rip path so the same pine stock can be checked in a similar way next time. That matters on workshop jobs where soft pine can move after ripping if the board carries internal stress.
One completed carcass job from Somerset West is recorded here, not a fixed result for every saw or pine batch. Motor power, fence alignment, extraction load and timber moisture can all change the finish and feed on a rip cut. If your stock sits outside the usual pine carcass range, note the board size and machine setup when you send through the query.
Verified Google reviews
For blade supply questions tied to this carcass run, use our contact form and include Somerset West, pine stock size, and saw details. Kya Sands, Johannesburg remains the dispatch reference for these catalogue enquiries.
