Contact form
Care
Diamond tile blades need simple care between cuts: rinse slurry off the rim, dry the steel core, and store the blade upright. Replace the blade when the rim is badly worn, cracked, or out of true, rather than trying to dress away structural damage. Most tile blades are maintained by cleaning and occasional dressing, not by conventional sharpening.
Tile slurry hardens fast if it is left on the rim after a day of cutting porcelain or glazed ceramic. Wash the blade with clean water, clear the mounting faces, and check that no grit is trapped near the bore before it goes back on the saw. Store each Diamond Tile Blade flat in its sleeve or vertically in a rack so the rim does not get knocked against other steel.
Daily care matters more than a weekly rescue on tile work. After wet cutting, empty the tray, rinse the pump filter, and wipe down the blade so fine silica sludge does not dry onto the rim. In dry Gauteng conditions, dress a glazed blade with a suitable abrasive block before the next porcelain run, and let any hot blade cool naturally after load-shedding interruptions or generator changeovers.
Take a diamond tile blade out of service if the rim shows segment loss, visible cracks in the core, or side wobble that remains after the flanges have been cleaned. Slow cutting through porcelain can sometimes be corrected by dressing the rim, but chipped edges on tiles often point to blade wear, wrong feed, or a bent mounting setup. Continuous rim tile blades are normally replaced once the diamond edge is spent rather than sent for reshaping.
If the rim shows missing segments, core heat marks, or a chipped bore, tell us through our contact form. Include the blade diameter, arbor size, machine type, and whether you cut porcelain, ceramic, or natural stone dry. For flange sets, reducer rings, and storage options that stop edge damage between jobs, see Holders.
Keep tile blades away from loose rubble, spare spindles, and mixed metal bins where the rim can be knocked before the next job. For workshop racks, use sleeves or separators so porcelain blades do not rub against larger masonry discs. If a blade is travelling from Johannesburg to a site load, pack it flat with board protection around the edge and keep reducers labelled with the saw it fits.
Operated with Astros Marketing (Pty) Ltd.
Our contact form is the place to send saw details and the tile material you are cutting. Include whether the setup is wet or dry, plus your workshop or site area around Kya Sands, Johannesburg, so the care guidance matches the conditions.
Verified Google reviews
